Services

Interior Painting

Rooms that look finished, not just painted.

Walls, ceilings, trim, doors, baseboards and millwork. We move and wrap furniture, cover floors properly, and mask to a line that holds — so the cut between wall and trim is sharp instead of approximately straight.

Preparation is where interior work is won or lost: nail holes and dents filled and sanded flat, cracks opened and properly repaired rather than skimmed over, gaps caulked, surfaces cleaned before primer. Then two coats, in the sheen that suits the room.

Exterior Painting

Built to survive the weather it’s standing in.

An exterior finish fails from underneath. If chalking, mildew or loose paint is left in place, the new coat is only as good as what’s beneath it — which is why the first days of an exterior job involve no colour at all.

We wash the surface, scrape and sand back failing areas, treat bare wood, caulk the joints that need it and spot-prime before any finish coat goes on. Coatings are chosen for Sacramento Valley sun and summer heat rather than for what’s on sale.

Cabinetry & Fine Finishes

A sprayed, catalysed finish — the kind cabinet shops use.

Refinishing cabinetry costs a fraction of replacing it, and done properly the result is hard to tell from new. Done improperly, it’s obvious within a season: brush marks in the rails, a soft finish that dents under a fingernail, doors that stick to the frame.

We take the doors and drawer fronts off, label them, and finish them off-site or in a controlled setup rather than brushing them in place. Surfaces are degreased — kitchen cabinetry carries years of cooking residue that ordinary cleaning doesn’t touch — then sanded, primed with an adhesion primer, and sprayed.

The coatings are professional systems: Centurion Wood Coatings, Envirolak, Renner and Alcea. They cure to a genuinely hard surface, hold their colour, and take daily use without marking.